product description
Ishikawa series slag remover is a high-efficiency slag and slag product for casting imported from Japan.
The slag in the molten metal is mainly derived from the oxidation of the metal and the lining of the furnace lining. The use of the Ishikawa series of slag remover not only can efficiently slag and remove slag, reduce the slag inclusion defects of the casting, and can change the chemical properties of the slag phase. Thereby reducing the erosion of the lining of the lining and improving the service life of the lining.
Product features and features:
1. It has less added amount, strong slag-forming ability, easy shelling and removal; it can collect the slag and foreign matter mixed in the casting solution, and remove the residue once.
2, the slag is brittle, not sticky; improve the life of the lining.
3. Light weight, large expansion coefficient, good thermal insulation performance, and low temperature drop when handling molten metal.
4. When pouring into a small pot, etc., it can prevent reflection and refraction for operation.
5. The surface of the casting solution is uniformly spread, which can accumulate slag and foreign matter to prevent mixing into the product during pouring.
6. Effectively cover the surface of the molten metal to reduce the oxidation of alloying elements during smelting.
7, do not change the metal composition, do not pollute the metal liquid.
8. It is smoke-free and dust-free during use, and maintains a clean workshop production environment.
9, not affected by the season, can be supplied at any time, and there is no danger of fire.
10. Produced by professional factories, the quality and quality can be kept uniform.
Instructions for use:
1. When the electric furnace is smelted, after the metal is liquefied, a small amount of slag removing agent is sprinkled on the surface of the molten metal to initially remove the slag, and then a layer is covered on the metal surface to serve as the heat preservation and slag, and the expansion thereof is rapid on the surface of the solution. A film is formed which is bonded to the slag to form an expanded body. By picking up the expansion body with a suitable rod-like tool, you can ensure a clean casting solution.
2. Before the molten steel is discharged, a little slag remover can be sprinkled on the bottom of the ladle. However, it is recommended that the slag agent should not be placed at the bottom of the ladle before the cast iron is discharged, so as not to affect the spheroidizing effect.
3. Sprinkle a little on the surface of the iron water in the ladle to pour.
4. The total amount added is about 0.1-0.2% by weight of the molten metal.